NSN 5306-01-037-5064
Coaxial Connector
Between 5.605 inches and 5.635 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6304U84 for national stock number 5306010375064.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-037-5064.
-
MPN or Model
NAS6304U84
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 5.605 inches and 5.635 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 5.240 inches and 5.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard 1st material response or ams 5737 assn standard 2nd material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6304 professional/industrial association standard
More from these suppliers
- 5940-01-425-6512 MPN NAS1063A5-445Terminal Board Marker Strip
- 5940-01-455-2461 MPN NAS1063A10-105BGTerminal Board Marker Strip
- 5935-01-597-0335 MPN E0762F15-05LSpec Backshell
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-079-7976 MPN MS24694S194Machine Screw
- 5305-00-104-5073 MPN NAS1352-4LE40PSocket Head Cap Screw
- 5305-00-151-1321 MPN MS35198-12Machine Screw
- 5305-00-174-0711 MPN NASM24693-S32Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-037-5064 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304U84 | National Aerospace Standards |