NSN 5306-01-037-6073
Coaxial Connector
Between 0.580 inches and 0.610 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30LM3-4 for national stock number 5306010376073.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-037-6073.
-
MPN or Model
BACB30LM3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.580 inches and 0.610 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30lm manufacturers standard
More from these suppliers
- 5305-00-246-7449 MPN AIC1024-3-3Close Tolerance Screw
- 5305-01-021-9152 MPN AIC811-04-17Socket Head Cap Screw
- 5305-01-085-7744 MPN AIC813-3R5Machine Screw
- 5305-01-207-7550 MPN 3M927-3L3Close Tolerance Screw
- 5305-01-220-8670 MPN LE111-0032-2104Machine Screw
- 5305-01-329-6669 MPN 03A174-4-15AClose Tolerance Screw
- 5305-01-330-7089 MPN AIC1700-5-5AClose Tolerance Screw
- 5305-01-357-6326 MPN LE111-0033-0003Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-037-6073 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3-4 | The Boeing Company |
BACB30LM3-4 | Sps Technologies, Llc |