NSN 5306-01-038-8693
Close Tolerance Hex Head Bolt
Between 2.001 inches and 2.031 inches fastener length, undercut hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30NF5D25 for national stock number 5306010388693.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-038-8693.
-
MPN or Model
BACB30NF5D25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Fastener Length
Between 2.001 inches and 2.031 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.816 inches first hole and 1.866 inches first hole -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-071-1383 MPN BACC45CM28A06S3Electrical Receptacle Connector
- 1560-00-564-2441 MPN 65-57051-86Aircraft Skin
- 5930-00-676-6663 MPN 65-3924Electrical Switch Retainer
- 1560-00-714-5756 MPN 35-7436Gam Bayonet Fitting
- 1560-00-755-9924 MPN 35-23681-4Fin Attachment Pin
- 5985-00-757-8981 MPN 65-31355-4Antenna
- 1560-00-773-8825 MPN 29-2516-3Support Clip
- 1680-00-774-7882 MPN 39-11666Initiator Attach Hatch Link
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-038-8693 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF5D25 | The Boeing Company |