NSN 5306-01-039-6514
Wheel Bolt
Between 1.085 inches and 1.165 inches fastener length, hexagon head style, between 0.488 inches and 0.508 inches head height, width between flats: between 0.428 inches and 0.437 inches .
Manufacturer part number 445566 for national stock number 5306010396514.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-039-6514.
-
MPN or Model
445566
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
Between 1.085 inches and 1.165 inches -
Head Style
Hexagon -
Head Height
Between 0.488 inches and 0.508 inches -
Width Between Flats
Between 0.428 inches and 0.437 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.335 inches and 0.415 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unc
More from these suppliers
- 5930-01-193-0774 MPN 470333Switch
- 5950-01-456-6255 MPN 24203101Electrical Coil
- 4820-01-410-8030 MPN 17112007Stop Diaphragm Valve
- 5305-01-181-5030 MPN G-427568Hexagon Head Cap Screw
- 4920-00-079-2626 MPN 6798571Aircraft Engine Maintenance Fixture
- 4820-01-328-6268 MPN 23036118-5Check Valve
- 4920-01-667-6051 MPN S3S25166238Aircraft Engine Maintenance Fixture
- 5305-01-440-9717 MPN 23036270-113Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-039-6514 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
445566 | Rolls-royce Corporation |
445566 | Allison Transmission, Inc. |
B-1.135-445566 | General Motors Corp |
4720010396514 | E.c.a Etablissement |