NSN 5306-01-039-7504
Coaxial Connector
Between 1.416 inches and 1.436 inches fastener length, hexagon head style, between 0.167 inches and 0.183 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number J714P051A for national stock number 5306010397504.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-039-7504.
-
MPN or Model
J714P051A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.515 inches and 0.525 inches -
Fastener Length
Between 1.416 inches and 1.436 inches -
Head Style
Hexagon -
Head Height
Between 0.167 inches and 0.183 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.901 inches and 0.911 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-760-9757 MPN 21C1365P011Stator Container
- 4920-00-824-1433 MPN 1C5550G1Locating Fixture
- 4920-00-838-7104 MPN 1C5620G01Aircraft Maintenance Kit
- 5905-00-958-0936 MPN R984P0510AInductive Wire Wound Fixed Resistor
- 4920-01-003-4750 MPN 518D544P33Panel
- 4920-01-064-6056 MPN 21C5924P01Vibration Test Set
- 5905-01-114-2255 MPN J165P5361AWire Wound Fixed Resistor
- 5905-01-114-9310 MPN J165P2370AInductive Wire Wound Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-039-7504 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J714P051A | General Electric Company |