NSN 5306-01-040-3362
Close Tolerance Hex Head Bolt
Between 1.517 inches and 1.547 inches fastener length, undercut hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30LJ6DU17 for national stock number 5306010403362.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-040-3362.
-
MPN or Model
BACB30LJ6DU17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.445 inches and 0.495 inches -
Fastener Length
Between 1.517 inches and 1.547 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.346 inches first hole and 1.396 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unf -
Specification Data
81205-bacb30lj manufacturers standard
More from these suppliers
- 5305-00-324-9303 MPN BACB30LK2-3Close Tolerance Screw
- 5305-01-050-9652 MPN BACB3OLR4U21Close Tolerance Screw
- 5305-01-512-8347 MPN 3M1169V3-27AClose Tolerance Screw
- 5305-01-603-8572 MPN PMT1124-10Close Tolerance Screw
- 5306-00-205-3700 MPN ACB30NE6H18Close Tolerance Bolt
- 5306-01-047-0374 MPN ST3M729-8D48Close Tolerance Bolt
- 5306-01-048-1128 MPN MS1250-04044Shear Bolt
- 5306-01-054-3417 MPN VCG0009L6-10Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-040-3362 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ6DU17 | Federal Manufacturing Corporation |
BACB30LJ6DU17 | Sps Technologies, Llc |
BACB30LJ6DU17 | Valley-todeco, Inc. |
BACB30LJ6DU17 | Sps Technologies, Llc |
BACB30LJ6DU17 | Arconic Global Fasteners & Rings, |
BACB30LJ6DU17 | Huck International, Inc. |
BACB30LJ6DU17 | Sps Technologies, Llc |
BACB30LJDU17 | Sps Technologies, Llc |
BACB30LJ6DU17 | The Boeing Company |
BACB30LJ6DU17 | Huck Intl Inc |
BACB30LJ6DU17 | Sps Technologies, Llc |