NSN 5306-01-040-4642
Wheel Bolt
Between 1.865 inches and 1.885 inches fastener length, hexagon head style, between 0.120 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number R433P25U for national stock number 5306010404642.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-040-4642.
-
MPN or Model
R433P25U
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.740 inches and 0.820 inches -
Fastener Length
Between 1.865 inches and 1.885 inches -
Head Style
Hexagon -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.065 inches and 1.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-013-2197 MPN 21C2653G002In Grinding Fixture
- 4920-00-356-7606 MPN 21C881G002Bearing Tab Bender
- 1560-00-469-9321 MPN 9679M30P07Thrust Actuator Mount
- 4920-00-575-7238 MPN 21C3629G001Check Valve And Holding Fixture
- 4820-00-617-8075 MPN L43620G03 REV H ITEM NO.43300Check Valve
- 4920-00-833-8448 MPN 21C4060-022Fuel Filter Retainer
- 5905-00-957-4805 MPN R984P1001AInductive Wire Wound Fixed Resistor
- 5905-00-957-8987 MPN R984P2901AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-040-4642 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R433P25U | General Electric Company |