NSN 5306-01-040-8709
Close Tolerance Hex Head Bolt
Between 1.838 inches and 1.868 inches fastener length, undercut hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number BACB30LJ7DU21 for national stock number 5306010408709.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-040-8709.
-
MPN or Model
BACB30LJ7DU21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.566 inches -
Fastener Length
Between 1.838 inches and 1.868 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.612 inches all holes and 1.662 inches all holes -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unf -
Specification Data
81205-bacb30lj manufacturers standard
More from these suppliers
- 5305-01-044-4418 MPN BACB30LH3U2Close Tolerance Screw
- 5305-01-435-3851 MPN BACB30LU7-33Close Tolerance Screw
- 5306-00-881-0229 MPN VFK100G-09026Shear Bolt
- 5306-01-044-5193 MPN VAL23607-5-12Shoulder Bolt
- 5306-01-045-2430 MPN ST3M507-4-36Shoulder Bolt
- 5306-01-054-3406 MPN C7521-4-7Shear Bolt
- 5306-01-206-7250 MPN BACB30LJ4U12Close Tolerance Bolt
- 5306-01-221-8688 MPN VAL22034-10F6-22Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-040-8709 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LJ7DU21 | The Boeing Company |
BACB30LJ7DU21 | Huck International, Inc. |
BACBN30LJ7DU21 | Sps Technologies, Llc |
BACBN30LJ7DU21 | Valley-todeco, Inc. |
BACBN30LJ7DU21 | Arconic Global Fasteners & Rings, |
BACBN30LJ7DU21 | Federal Manufacturing Corporation |
BACBN30LJ7DU21 | Sps Technologies, Llc |
BACBN30LJ7DU21 | Sps Technologies, Llc |
BACBN30LJ7DU21 | Sps Technologies, Llc |
BACBN30LJ7DU21 | Voi-shan/chatsworth |
BACB30LJ7DU21 | Huck Intl Inc |
BACBN30LJ7DU21 | Huck Intl Inc |