NSN 5306-01-043-5731
Close Tolerance Hex Head Bolt
Pellet type element in thread.
Manufacturer part number NAS1223C6N for national stock number 5306010435731.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-043-5731.
-
MPN or Model
NAS1223C6N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.698 inches and 0.728 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
64.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams5732 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1223 professional/industrial association standard
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5940-01-413-3007 MPN NAS1063B166-185Terminal Board Marker Strip
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-009-0521 MPN NAS1102C04-4PMachine Screw
- 5305-00-021-3801 MPN NASM35307-411Hexagon Head Cap Screw
- 5305-00-107-1990 MPN NAS1189-04P4Socket Head Cap Screw
- 5305-00-124-3086 MPN NAS1122-12Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-043-5731 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1223C6N | National Aerospace Standards |
NAS1223C6N | National Aerospace Standards |
NAS1223C6N | National Aerospace Standards |