NSN 5306-01-043-6686
Close Tolerance Hex Head Bolt
One 0.109 in. Lock wire hole located 0.131 in. From end.
Manufacturer part number 12008411 for national stock number 5306010436686.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-043-6686.
-
MPN or Model
12008411
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.510 inches -
Fastener Length
5.630 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
0.562 inches -
Grip Diameter
Between 0.2720 inches and 0.2820 inches -
Thread Diameter
0.375 inches -
Grip Length
5.000 inches -
Thready Qty Per Inch (tpi)
16 -
Hardness Rating
35.0 rockwell c and 39.0 rockwell c -
Surface Finish
125.0 microinches -
Material
Steel -
Material Specification
Astm a400, class q1 assn standard single material response -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification 1st treatment response head and q-p-416, type 3, class 2 federal standard 13th treatment response head -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-970-1210 MPN 7695038Seat
- 5950-01-196-8156 MPN 9365724Power Transformer
- 4820-01-229-4199 MPN 9352671Vacuum Regulating Valve
- 5905-01-414-6908 MPN 12917533Resistor Assembly
- 5925-01-170-2837 MPN 9353947Circuit Breaker Cover
- 6110-00-082-0268 MPN 10548961Voltage Regulator
- 5305-00-531-6673 MPN 5316673Special Screw
- 5305-01-623-7783 MPN 13041473Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-043-6686 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12008411 | Us Army Ardec Rdecom |
12008411 | Army, United States Department Of |