NSN 5306-01-043-7697
Wheel Bolt
Between 1.178 inches and 1.198 inches fastener length, hexagon head style, between 0.178 inches and 0.198 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9520-15 for national stock number 5306010437697.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-043-7697.
-
MPN or Model
MS9520-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.865 inches and 0.945 inches -
Fastener Length
Between 1.178 inches and 1.198 inches -
Head Style
Hexagon -
Head Height
Between 0.178 inches and 0.198 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.253 inches and 0.313 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-005-7073 MPN MS3106E28-9PElectrical Plug Connector
- 5950-00-070-5833 MPN MS90537-20Radio Frequency Coil
- 5905-00-104-5756 MPN MS35043-159Composition Fixed Resistor
- 5935-00-108-7039 MPN MS3103-20-22PElectrical Receptacle Connector
- 5930-00-109-1941 MPN MS24660-31EToggle Switch
- 5935-00-127-1444 MPN MS3126F22-41SElectrical Plug Connector
- 5935-00-175-4421 MPN MS27473E14B18SElectrical Plug Connector
- 5935-00-185-9575 MPN MS3470L12-10PWElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-043-7697 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9520-15 | Military Standards |