NSN 5306-01-044-0738
Coaxial Connector
Between 1.384 inches and 1.431 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BM17020-6-16A for national stock number 5306010440738.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-044-0738.
-
MPN or Model
BM17020-6-16A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.384 inches and 1.431 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium or cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-372-9982 MPN ST3M455-3L11-1Close Tolerance Screw
- 5305-01-006-9329 MPN LS15263-3-6Machine Screw
- 5306-00-195-2303 MPN VFK100G-08044Shear Bolt
- 5306-01-028-8943 MPN J646P27DMachine Bolt
- 5306-01-054-3410 MPN C7521-5-12Shear Bolt
- 5306-01-054-3413 MPN VCG00009-6-10Shear Bolt
- 5306-01-107-7239 MPN VAL23033-5Close Tolerance Bolt
- 5306-01-332-7216 MPN VAL23001-7D031Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-044-0738 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17020-6-16A | Huck International, Inc. |
VAL22034-6G16 | Valley-todeco, Inc. |
VAL22034-6F16 | Valley-todeco, Inc. |
AIC516B6-16 | Sps Technologies, Llc |
EWSB22D6-A16 | Sps Technologies, Llc |
VS3071-6F16 | Arconic Global Fasteners & Rings, |
H401-6-16 | Huck Intl Inc |
GB511B6-16 | Northrop Grumman Systems Corporation |
BM17020-6-16A | Huck Intl Inc |
EWSB22D6-A16 | Sps Technologies, Llc |
VS3071-6F16 | Alcoa Global Fasteners, Inc. |
H401-6-16 | Huck International, Inc. |