NSN 5306-01-046-3257
Close Tolerance Hex Head Bolt
Retaining ring on shank.
Manufacturer part number 121673-4-38 for national stock number 5306010463257.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-046-3257.
-
MPN or Model
121673-4-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 2.793 inches and 2.813 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.375 inches and 2.391 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.693 inches first hole and 2.723 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-027-7938 MPN 32-31850-6Panel Member Rib
- 1560-00-073-1117 MPN 32-31749-304Aircraft Access Door
- 1560-00-115-7544 MPN 32-32530-13Center Fuselage Shingle
- 1560-00-130-9281 MPN 32-50172-301Aircraft Structural Component Support
- 1560-00-253-9313 MPN 68A311206-2006Nose La Retract Actuator Support
- 1560-00-255-8975 MPN 68A312024-2006Aircraft Access Cover
- 5950-00-261-8234 MPN 5M931-20Power Transformer
- 4920-00-313-4068 MPN AK168334002-2Aircraft Maintenance Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-046-3257 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121673-4-38 | Sps Technologies, Llc |
ST3M735-4-38 | Alcoa Global Fasteners, Inc. |
ST3M735-4-38 | Boeing Company, The |