NSN 5306-01-046-3261
Close Tolerance Hex Head Bolt
Retaining ring on shank.
Manufacturer part number 121673-4-24 for national stock number 5306010463261.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-046-3261.
-
MPN or Model
121673-4-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 1.918 inches and 1.938 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.500 inches and 1.516 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.818 inches first hole and 1.848 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-119-7405 MPN 67077-5-7Close Tolerance Screw
- 5305-00-252-8991 MPN 106752-04-154CMachine Screw
- 5305-00-889-2883 MPN NAS1143C6Machine Screw
- 5305-01-005-0465 MPN 38030-3F10CSocket Head Cap Screw
- 5305-01-044-0745 MPN SFH22D6-20Close Tolerance Screw
- 5305-01-050-4310 MPN HT4008-3-8Shoulder Screw
- 5305-01-273-9450 MPN 06046Socket Head Cap Screw
- 5305-01-303-9650 MPN 3M991N3L9Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-046-3261 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121673-4-24 | Sps Technologies, Llc |
ST3M735-4-24 | Sps Technologies, Llc |
ST3M735-4-24 | Boeing Company, The |
ST3M735-4-24 | Sps Technologies, Llc |
121673-4-24 | Sps Technologies, Llc |