NSN 5306-01-046-3862
Coaxial Connector
Between 1.830 inches and 1.850 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: between 0.4358 inches and 0.4367 inches .
Manufacturer part number PBF7521-7D21 for national stock number 5306010463862.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-046-3862.
-
MPN or Model
PBF7521-7D21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 1.830 inches and 1.850 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.828 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.544 inches first hole and 1.564 inches first hole -
Material
Stainless steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-356-1623 MPN LS15265V3-2Close Tolerance Screw
- 5305-01-349-0813 MPN VCL0009-6-10Close Tolerance Screw
- 5305-01-412-7542 MPN VCL0009-4-34Close Tolerance Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5306-01-044-3011 MPN VAL23033-5D17Close Tolerance Bolt
- 5306-01-059-8673 MPN C4356N6D1563Shoulder Bolt
- 5306-01-067-8530 MPN VAL23033-4H44Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-046-3862 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-7D21 | Sps Technologies, Llc |
120978-7D21 | Sps Technologies, Llc |
AIC596-7D21 | Sps Technologies, Llc |
VS3133-7D21 | Alcoa Global Fasteners, Inc. |
VCG009-7D21 | Valley-todeco, Inc. |
SF118-7D21 | Saturn Fasteners Inc |
H411-7D21 | Huck International, Inc. |
120978-7D21 | Sps Technologies, Llc |
VS3133-7D21 | Tactair Fluid Controls, Inc. |
C7521-7D21 | Lockheed Martin Corporation |
VS3133-7D21 | Arconic Global Fasteners & Rings, |
C7521-7D21 | Valley-todeco, Inc. |
C7521-7D21 | Huck International, Inc. |
596-7-21 | Sps Technologies, Llc |