NSN 5306-01-047-1881
Coaxial Connector
Hexagon head style, between 0.109 inches and 0.141 inches head height, between 0.428 inches and 0.440 inches width between flats, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number 160D920110-13 for national stock number 5306010471881.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-047-1881.
-
MPN or Model
160D920110-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
5.750 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 -
Material Specification
Aisi assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-006-9929 MPN 128SCEC603-1Check Valve
- 1560-00-037-1495 MPN 89460-22Exhaust Pipe
- 1680-00-079-0763 MPN 121AVP10132-25Light Transmitting Indicating Panel
- 5935-00-158-4890 MPN GA800RW6Electrical Connector Backshell
- 4920-00-186-8738 MPN 1128SME40032-1Shear Pin Pilot Set
- 5935-00-244-8219 MPN GC811GB1RT2Electrical Receptacle Connector
- 1560-00-324-0288 MPN 37E54518-1Rudder Ce Seal Assy
- 5935-00-356-7895 MPN GA800MT24-12A2Electrical Connector Backshell
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-047-1881 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D920110-13 | Northrop Grumman Systems Corporation |
160D920110-13 | Northrop Grumman Systems Corporation |