NSN 5306-01-047-9431
Coaxial Connector
Between 2.431 inches and 2.472 inches fastener length, hexagon head style, between 0.120 inches and 0.140 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 51B465-4-34 for national stock number 5306010479431.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-047-9431.
-
MPN or Model
51B465-4-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.357 inches -
Fastener Length
Between 2.431 inches and 2.472 inches -
Head Style
Hexagon -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.315 inches first hole and 2.356 inches first hole -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
76823-51b464 manufacturers standard
More from these suppliers
- 1560-00-034-2427 MPN 3-50355-1Start Air Support Assembly
- 1560-00-145-2874 MPN 14-27225-2Leading Edge Flap Cover
- 1560-00-225-4392 MPN 4-23498-1Aircraft Fairing
- 1560-00-394-5814 MPN 6-43613-503Hydraulic Lines Clamping Block
- 1560-00-605-9552 MPN 6-74268-1Aircraft Structural Component Support
- 1560-00-709-7207 MPN 2-13557-1Canopy Latch
- 1560-00-765-1102 MPN 2-74164-1Aileron Surface Drive Rod
- 4920-00-951-0956 MPN 3-76222-1Splined Sha Adapter
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-047-9431 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B465-4-34 | Huck International, Inc. |
51B464-4-34 | Northrop Grumman Technical Services, |
51B464-4-34 | Northrop Grumman Systems Corporation |
51B465-4-34 | Huck Intl Inc |