NSN 5306-01-048-9906
Close Tolerance Hex Head Bolt
Between 2.936 inches and 2.966 inches fastener length, undercut hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4D41 for national stock number 5306010489906.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-048-9906.
-
MPN or Model
BACB30NF4D41
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 2.936 inches and 2.966 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.552 inches and 2.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.810 inches first hole and 2.860 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30nf manufacturers standard
More from these suppliers
- 1560-00-073-1023 MPN 107P5010-7Tailpipe Assembly
- 4920-00-228-1847 MPN 114G1009-1Rotor Bl Angle Tool
- 5905-00-262-0792 MPN BACRH14U562R0EFFilm Fixed Resistor
- 1560-00-340-9516 MPN 9-65146-1Stabilizer And Fin Hinge
- 1560-00-445-9563 MPN 39-14589Support Bracket Assembly
- 4920-00-507-0895 MPN F52352-500Interface Device Adapter Assembly
- 5985-00-611-3302 MPN 5-88150-1Antenna
- 1560-00-631-7596 MPN 5-86559-163Gap Wing Cover
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-048-9906 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4D41 | The Boeing Company |