NSN 5306-01-049-8408
Coaxial Connector
Between 1.956 inches and 1.976 inches fastener length, spline drive shear head head style, 0.281 inches head height, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number PBF7521-8D23 for national stock number 5306010498408.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-049-8408.
-
MPN or Model
PBF7521-8D23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 1.956 inches and 1.976 inches -
Head Style
Spline drive shear head -
Head Height
0.281 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.901 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.701 inches first hole and 1.721 inches first hole -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2814 MPN LS15267V3-17Machine Screw
- 5305-01-040-7955 MPN BACB30LU6-48Close Tolerance Screw
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5306-00-425-2657 MPN VAL23602-4DS028Close Tolerance Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-031-4850 MPN BACB30NF4H17Close Tolerance Bolt
- 5306-01-043-5724 MPN VEP220121-6V65Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-049-8408 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-8D23 | Sps Technologies, Llc |
VS3133-8D23 | Huck International, Inc. |
120978-8D23 | Sps Technologies, Llc |
AIC596-8D23 | Sps Technologies, Llc |
VS3133-8D23 | Alcoa Global Fasteners, Inc. |
C7521-8D23 | Valley-todeco, Inc. |
VS3133-8D23 | Arconic Global Fasteners & Rings, |
C7521-8D23 | Sps Technologies, Llc |
C7521-8D23 | Lockheed Martin Corporation |