NSN 5306-01-050-1500
Coaxial Connector
Between 1.641 inches and 1.671 inches fastener length, double hexagon w/hole head style, 0.254 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number C305-4-18 for national stock number 5306010501500.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-050-1500.
-
MPN or Model
C305-4-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.641 inches and 1.671 inches -
Head Style
Double hexagon w/hole -
Head Height
0.254 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.465 inches and 0.475 inches -
Extended Washer Thickness
0.042 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-809-7486 MPN 333937Machine Screw
- 5305-01-036-0848 MPN AIC84-4-5Machine Screw
- 5305-01-101-6018 MPN AIC812-06-21Machine Screw
- 5305-01-235-2025 MPN 3M925C5-13AClose Tolerance Screw
- 5305-01-381-2351 MPN AIC818-08-103CSocket Head Cap Screw
- 5305-01-417-2490 MPN TX1026V-3-14Close Tolerance Screw
- 5305-01-435-7935 MPN BACB30LU9-34Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-050-1500 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C305-4-18 | Sps Technologies, Llc |
C305-4-18 | Sps Technologies, Llc |
C305-4-18 | Sps Technologies, Llc |
C305-4-18 | Alcoa Global Fasteners, Inc. |
C305-4-18 | Lockheed Martin Corporation |
EWB26-4-18 | Sps Technologies, Llc |
EWB26-4-18 | Sps Technologies, Llc |
C305-4-18 | Arconic Global Fasteners & Rings, |