NSN 5306-01-050-2616
Coaxial Connector
Between 2.272 inches and 2.292 inches fastener length, spline drive shear head head style, 0.328 inches head height, grip diameter: between 0.5607 inches and 0.5616 inches .
Manufacturer part number PBF7521-9D27 for national stock number 5306010502616.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-050-2616.
-
MPN or Model
PBF7521-9D27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.272 inches and 2.292 inches -
Head Style
Spline drive shear head -
Head Height
0.328 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
1.049 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.006 inches first hole and 2.026 inches first hole -
Material
Stainless steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-512-8325 MPN 3M1170C5-14AFClose Tolerance Screw
- 5305-01-600-9481 MPN PMT1153-7Close Tolerance Screw
- 5306-00-321-9332 MPN VAL23029-5D18Close Tolerance Bolt
- 5306-01-030-1765 MPN ST3M729-5D13Close Tolerance Bolt
- 5306-01-134-2721 MPN VAL23029-5-98Close Tolerance Bolt
- 5306-01-221-8688 MPN VAL22034-10F6-22Shear Bolt
- 5306-01-332-4385 MPN STSBG001A04U021Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-050-2616 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-9D27 | Sps Technologies, Llc |
VCG0009-9D-27 | Valley-todeco, Inc. |
H411-9D27 | Huck International, Inc. |
120978-9D27 | Sps Technologies, Llc |
120978-9D27 | Sps Technologies, Llc |
AIC596-9D27 | Sps Technologies, Llc |
VS3133-9D27 | Arconic Global Fasteners & Rings, |
VS3133-9D27 | Alcoa Global Fasteners, Inc. |
C7521-9D27 | Alcoa Global Fasteners, Inc. |
C7521-9D27 | Lockheed Martin Corporation |