NSN 5306-01-050-2617
Coaxial Connector
Between 3.830 inches and 3.850 inches fastener length, spline drive shear head head style, 0.281 inches head height, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number PBF7521-8D53 for national stock number 5306010502617.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-050-2617.
-
MPN or Model
PBF7521-8D53
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 3.830 inches and 3.850 inches -
Head Style
Spline drive shear head -
Head Height
0.281 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.901 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 3.302 inches and 3.322 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.575 inches first hole and 3.595 inches first hole -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-031-2367 MPN AIC1184-302Close Tolerance Screw
- 5305-00-080-0142 MPN 3MA334CFA10-5Machine Screw
- 5305-00-382-1410 MPN NAS1101E08-20Machine Screw
- 5305-00-840-8068 MPN SK2015-379Machine Screw
- 5305-00-916-4873 MPN AIC1023-4Machine Screw
- 5305-01-134-9360 MPN AIC944-3-9Machine Screw
- 5305-01-168-3903 MPN AIC4040E4-04RClose Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-050-2617 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-8D53 | Sps Technologies, Llc |
120978-8D53 | Sps Technologies, Llc |
VS3133-8D53 | Alcoa Global Fasteners, Inc. |
AIC596-8D53 | Sps Technologies, Llc |
C7521-8D53 | Lockheed Martin Corporation |