NSN 5306-01-050-4984
Coaxial Connector
Between 2.576 inches and 2.596 inches fastener length, spline drive shear head head style, 0.539 inches head height, width between flats: 1.715 inches .
Manufacturer part number PBF7521S16D28 for national stock number 5306010504984.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-050-4984.
-
MPN or Model
PBF7521S16D28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.850 inches -
Fastener Length
Between 2.576 inches and 2.596 inches -
Head Style
Spline drive shear head -
Head Height
0.539 inches -
Width Between Flats
1.715 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
1.000 inches -
Grip Length
Between 1.726 inches and 1.746 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.326 inches first hole -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-365-0409 MPN BACB30LR6-43Close Tolerance Screw
- 5305-01-386-2556 MPN VCL0009-3-9Machine Screw
- 5305-01-435-5961 MPN BACB30LU7-53Close Tolerance Screw
- 5306-00-003-9388 MPN MS21250-08052Shear Bolt
- 5306-00-160-1586 MPN STSBG001A06U026Close Tolerance Bolt
- 5306-00-458-1871 MPN BACB30EK5-11CShear Bolt
- 5306-01-004-9527 MPN VAL23029-8D29Close Tolerance Bolt
- 5306-01-044-2977 MPN VAL23607-4-19Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-050-4984 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521S16D28 | Sps Technologies, Llc |
120978S16D28 | Sps Technologies, Llc |
AIC596S16D28 | Sps Technologies, Llc |
VS3133S16D28 | Alcoa Global Fasteners, Inc. |
C7521S16D28 | Valley-todeco, Inc. |
VS3133S16D28 | Arconic Global Fasteners & Rings, |
C7521S16D28 | Huck International, Inc. |
C7521S16D28 | Sps Technologies, Llc |
VS3133S16D28 | Tactair Fluid Controls, Inc. |
C7521S16D28 | Alcoa Global Fasteners, Inc. |
C7521S16D28 | Lockheed Martin Corporation |
C7521S16D28 | Huck Intl Inc |