NSN 5306-01-050-4985
Coaxial Connector
Between 1.296 inches and 1.316 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number 120978-5-14 for national stock number 5306010504985.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-050-4985.
-
MPN or Model
120978-5-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.296 inches and 1.316 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.605 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.858 inches and 0.878 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-413-8477 MPN VCL0009-7-30Close Tolerance Screw
- 5305-01-600-3673 MPN 3M1275E4D16AMachine Screw
- 5305-01-618-7124 MPN VT10021-3-11RClose Tolerance Screw
- 5306-00-143-3054 MPN 9628M72P02Machine Bolt
- 5306-00-939-9670 MPN 502462Close Tolerance Bolt
- 5306-01-027-1995 MPN VAL23033-3-9Close Tolerance Bolt
- 5306-01-030-1765 MPN ST3M729-5D13Close Tolerance Bolt
- 5306-01-043-6875 MPN VEP220121-9F25Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-050-4985 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120978-5-14 | Sps Technologies, Llc |
AIC596-5-14 | Sps Technologies, Llc |
PBF7521-5-14 | Sps Technologies, Llc |
VS3133-5-14 | Alcoa Global Fasteners, Inc. |
C7521-5-14 | Valley-todeco, Inc. |
VS3133-5-14 | Arconic Global Fasteners & Rings, |
C7521-5-14 | Huck International, Inc. |
C7521-5-14 | Sps Technologies, Llc |
C7521-5-14 | Lockheed Martin Corporation |
VS3133-5-14 | Tactair Fluid Controls, Inc. |
60591-03 | Edo |