NSN 5306-01-050-8007
Wheel Bolt
4.750 inches fastener length, hexagon head style, between 0.378 inches and 0.444 inches head height, width between flats: between 0.906 inches and 0.928 inches .
Manufacturer part number 1A3203 for national stock number 5306010508007.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-050-8007.
-
MPN or Model
1A3203
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
4.750 inches -
Head Style
Hexagon -
Head Height
Between 0.378 inches and 0.444 inches -
Width Between Flats
Between 0.906 inches and 0.928 inches -
Thread Diameter
0.625 inches -
Grip Length
3.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Minimum Yield Strength
120000 pounds per square inch -
Material
Steel -
Material Specification
Sae j429 gr 8 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-999-3226 MPN 2L3402Pressure Switch
- 4820-01-098-2132 MPN 8J2030Valve Piston
- 5930-01-250-0822 MPN 6S5997Pull Switch
- 4820-01-267-0503 MPN 9P3203Directional Control Linear Valve Slide
- 4820-01-514-2026 MPN 9T0356 00Vacuum Regulating Valve
- 5935-01-523-4797 MPN 1310749Electrical Receptacle Connector
- 5940-01-524-0361 MPN 122-4401Lug Terminal
- 5905-01-535-2967 MPN 102-0050Thermal Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-050-8007 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |
1A3203 | Caterpillar Inc. |