NSN 5306-01-051-5908
Close Tolerance Hex Head Bolt
Between 1.111 inches and 1.141 inches fastener length, spline drive shear head head style, 0.167 inches head height, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number PBF7521-5-11 for national stock number 5306010515908.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-051-5908.
-
MPN or Model
PBF7521-5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 1.111 inches and 1.141 inches -
Head Style
Spline drive shear head -
Head Height
0.167 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Head Minor Diameter
0.605 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-413-3317 MPN VCL0009-5-31Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-561-6131 MPN ST3M557-6D12Close Tolerance Screw
- 5306-00-943-2511 MPN 756171-111Close Tolerance Bolt
- 5306-01-054-3416 MPN C7521-4-10Shear Bolt
- 5306-01-141-7874 MPN VAL23608-4D14Shoulder Bolt
- 5306-01-142-9375 MPN VAL23607-4D94Shoulder Bolt
- 5306-01-164-7459 MPN BACB30LE4U6Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-051-5908 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-5-11 | Sps Technologies, Llc |
C7521-5-11 | Sps Technologies, Llc |
C7521-5-11 | Valley-todeco, Inc. |
C7521-5-11 | Sps Technologies, Llc |
C7521-5-11 | Alcoa Global Fasteners, Inc. |
C7521 | Lockheed Martin Corporation |
C7521-5-11 | Lockheed Martin Corporation |
VCG0009-5-11 | Valley-todeco, Inc. |
AIC596-5-11 | Sps Technologies, Llc |
C7521-5-11 | M.s. Aerospace Inc. |
H411-5-11 | Huck International, Inc. |
120978-5-11 | Sps Technologies, Llc |
120978-5-11 | Sps Technologies, Llc |
VS3133-5-11 | Alcoa Global Fasteners, Inc. |