NSN 5306-01-052-1780
Coaxial Connector
4.122 inches fastener length, double hexagon w/hole head style, 0.557 inches head height, width between flats: between 0.616 inches and 0.627 inches .
Manufacturer part number MS21250-09052 for national stock number 5306010521780.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-052-1780.
-
MPN or Model
MS21250-09052
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.852 inches -
Fastener Length
4.122 inches -
Head Style
Double hexagon w/hole -
Head Height
0.557 inches -
Width Between Flats
Between 0.616 inches and 0.627 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
0.133 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
3.250 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-064-5500 MPN MS3108R18-14SWElectrical Plug Connector
- 5940-00-113-8201 MPN MS25036-137Lug Terminal
- 5930-00-142-8651 MPN MS21026-B211Toggle Switch
- 5935-00-147-7308 MPN MS3101F24-6SElectrical Plug Connector
- 5935-00-171-0139 MPN MS27474T22AZSElectrical Receptacle Connector
- 5935-00-234-9896 MPN MS3126P18-32SWElectrical Plug Connector
- 5940-00-236-7176 MPN MS20659-11Lug Terminal
- 5950-00-243-0093 MPN MS75084-9Radio Frequency Coil
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-052-1780 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-09052 | Military Standards |