NSN 5306-01-052-4441
Coaxial Connector
Between 0.908 inches and 0.955 inches fastener length, double hexagon head style, between 0.130 inches and 0.150 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number VAL22034-3F11 for national stock number 5306010524441.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-052-4441.
-
MPN or Model
VAL22034-3F11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.210 inches and 0.277 inches -
Fastener Length
Between 0.908 inches and 0.955 inches -
Head Style
Double hexagon -
Head Height
Between 0.130 inches and 0.150 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
85495-b-17020 manufacturers standard
More from these suppliers
- 5305-00-505-2994 MPN LS15264V3-12Machine Screw
- 5305-01-055-3807 MPN BACB30LU6-8Close Tolerance Screw
- 5305-01-212-5213 MPN ST3M454-3DL17Close Tolerance Screw
- 5305-01-333-6407 MPN BACB30LH2-6Close Tolerance Screw
- 5305-01-435-3851 MPN BACB30LU7-33Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-462-2861 MPN 3M1169V3-8AClose Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-052-4441 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL22034-3F11 | Valley-todeco, Inc. |
VAL22034-3G11 | Valley-todeco, Inc. |
AIC516B3-11 | Sps Technologies, Llc |
EWSB22D3-A11 | Sps Technologies, Llc |
VS3071-3F11 | Arconic Global Fasteners & Rings, |
BM17020-3-11A | Huck International, Inc. |
H401-3-11 | Huck Intl Inc |
VS3071-3F11 | Alcoa Global Fasteners, Inc. |
GB511B3-11 | Northrop Grumman Systems Corporation |
BM17020-3-11A | Huck Intl Inc |
EWSB22D3-A11 | Sps Technologies, Llc |
H401-3-11 | Huck International, Inc. |
VAL22034-3F11 | Valley-todeco, Inc. |
VAL22034-3G11 | Valley-todeco, Inc. |
AIC516B3-11 | Sps Technologies, Llc |
EWSB22D3-A11 | Sps Technologies, Llc |
GB511B3-11 | Northrop Grumman Systems Corporation |
VS3071-3F11 | Alcoa Global Fasteners, Inc. |
EWSB22D3-A11 | Sps Technologies, Llc |
BM17020-3-11A | Huck Intl Inc |