NSN 5306-01-052-4444
Coaxial Connector
Between 1.312 inches and 1.359 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number BM17020-8-13A for national stock number 5306010524444.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-052-4444.
-
MPN or Model
BM17020-8-13A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.557 inches -
Fastener Length
Between 1.312 inches and 1.359 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
26512-gb511b manufacturers standard
More from these suppliers
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-623-9273 MPN 6-83013Blind Attachme Bolt
- 5306-00-719-3852 MPN VAL21013-12060Shear Bolt
- 5306-01-026-4372 MPN VEP22055-6-26Shear Bolt
- 5306-01-054-3420 MPN VCG0009L6-14Shear Bolt
- 5306-01-132-5282 MPN VEP220121-6V12Shear Bolt
- 5306-01-143-0584 MPN VAL23607-4-24Shoulder Bolt
- 5306-01-219-7161 MPN VCG00009L6-23Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-052-4444 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17020-8-13A | Huck International, Inc. |
VS3071-8F13 | Arconic Global Fasteners & Rings, |
VAL22034-8F13 | Valley-todeco, Inc. |
VAL22034-8G13 | Valley-todeco, Inc. |
AIC516B8-13 | Sps Technologies, Llc |
EWSB22D8-A13 | Sps Technologies, Llc |
H401-8-13 | Huck Intl Inc |
VS3071-8F13 | Alcoa Global Fasteners, Inc. |
GB511B8-13 | Northrop Grumman Systems Corporation |
BM17020-8-13A | Huck Intl Inc |
EWSB22D8-A13 | Sps Technologies, Llc |