NSN 5306-01-053-9778
Coaxial Connector
Between 1.848 inches and 1.878 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NE4-23 for national stock number 5306010539778.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-053-9778.
-
MPN or Model
BACB30NE4-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.848 inches and 1.878 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-092-2813 MPN 3-52113-2Wing Flap Drive Adapter
- 1560-00-210-9019 MPN 6-51841-6Aircraft Structural Component Support
- 1560-00-340-4136 MPN 6-52007-4Window Torque Tube
- 1560-00-340-9312 MPN 5-88792-32Aircraft Access Cover
- 1560-00-463-3519 MPN 65-32215-7Crank Assy
- 1560-00-633-5614 MPN 35-2465-502Aircraft Strut
- 1560-00-651-8285 MPN 69-8929-4Outboard Tab Mast Fairing
- 1560-00-671-9819 MPN 5-86389-145Aircraft Fairing
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-053-9778 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE4-23 | The Boeing Company |