NSN 5306-01-054-1530
Coaxial Connector
Between 2.867 inches and 2.897 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number BACB30NE7-35 for national stock number 5306010541530.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-1530.
-
MPN or Model
BACB30NE7-35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.669 inches and 0.719 inches -
Fastener Length
Between 2.867 inches and 2.897 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-072-8976 MPN 69-27408-2Aircraft Structural Component Support
- 1560-00-073-4062 MPN A02S8029-4Door Assembly
- 1560-00-073-4131 MPN A02E3111-5Box Assembly
- 1560-00-088-2008 MPN 5-58314Rear Wheel Steering Drum
- 5975-00-284-4984 MPN 5-68251-7Flexible Metal Conduit Assembly
- 1560-00-334-5898 MPN 5-97628Spoiler Support Arm
- 1680-00-613-3492 MPN 50-3109-11Stabilize Shoe Assy
- 4920-00-625-7778 MPN F52553Aircraft Maintenance Fixture
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-1530 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE7-35 | The Boeing Company |