NSN 5306-01-054-1623
Coaxial Connector
Between 2.438 inches and 2.468 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30NE6-30 for national stock number 5306010541623.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-1623.
-
MPN or Model
BACB30NE6-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 2.438 inches and 2.468 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-435-8284 MPN BACB30LU9-40Close Tolerance Screw
- 5305-01-477-5623 MPN ST3M652C6-13AClose Tolerance Screw
- 5305-01-604-9086 MPN 3M1277E8D28AMachine Screw
- 5306-01-024-2463 MPN VAL23029-3-38Close Tolerance Bolt
- 5306-01-027-1998 MPN VAL23029-5-7Close Tolerance Bolt
- 5306-01-157-8358 MPN 4057T14P03Externally Relieved Body Bolt
- 5306-01-173-3545 MPN VFK600-4-31Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-1623 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE6-30 | The Boeing Company |
BACB30NE6-30 | Valley-todeco, Inc. |
BACB30NE6-30 | Sps Technologies, Llc |
BACB30NE6-30 | Arconic Global Fasteners & Rings, |
BACB30NE6-30 | Huck International, Inc. |
BACB30NE6-30 | Federal Manufacturing Corporation |
BACB30NE6-30 | Arconic Global Fasteners & Rings, |
BACB30NE6-30 | Sps Technologies, Llc |
BACB30NE6-30 | Sps Technologies, Llc |
BACB30NE6-30 | Sps Technologies, Llc |