NSN 5306-01-054-1632
Coaxial Connector
Dry film lubricant.
Manufacturer part number BACB30LM3SU3 for national stock number 5306010541632.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-1632.
-
MPN or Model
BACB30LM3SU3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.518 inches and 0.548 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2653 MPN 100-191-5-3Materi Aircraft Pin
- 5305-00-927-7899 MPN AIC82-3-12Machine Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-053-5801 MPN C9535-6-14Close Tolerance Screw
- 5305-01-061-0732 MPN NAS1101-3-18BMachine Screw
- 5305-01-101-4816 MPN NAS1101E04-12Machine Screw
- 5305-01-134-9361 MPN SC2671-4-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-1632 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3SU3 | The Boeing Company |
BACB30LM3SU3 | Sps Technologies, Llc |
BACB30LM3SU3 | Huck International, Inc. |
BACB30LM3SU3 | Huck Intl Inc |
Stock Check
- NE: 11149
- NS: 116