NSN 5306-01-054-3406
Coaxial Connector
Between 0.798 inches and 0.818 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number PBF7521-4-7 for national stock number 5306010543406.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-3406.
-
MPN or Model
PBF7521-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.798 inches and 0.818 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.531 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5151 MPN ST3M455-4L8-1Close Tolerance Screw
- 5305-01-106-3860 MPN 3M926-5L10Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5306-00-728-0645 MPN 3M33-3-11Machine Bolt
- 5306-00-955-8209 MPN VKF100G-05010Shear Bolt
- 5306-01-010-2346 MPN VEP220121-6F-17Shear Bolt
- 5306-01-043-5721 MPN VEP220121-5FH12Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-3406 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-4-7 | Sps Technologies, Llc |
120978-4-7 | Sps Technologies, Llc |
AIC596-4-7 | Sps Technologies, Llc |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
C7521-4-7 | Lockheed Martin Corporation |
PBF7521-4-7 | Sps Technologies, Llc |
AIC596-4-7 | Sps Technologies, Llc |
120978-4-7 | Sps Technologies, Llc |
C7521-4-7 | Lockheed Martin Corporation |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |
PBF7521-4-7 | Sps Technologies, Llc |
AIC596-4-7 | Sps Technologies, Llc |
120978-4-7 | Sps Technologies, Llc |
C7521-4-7 | Lockheed Martin Corporation |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |
PBF7521-4-7 | Sps Technologies, Llc |
AIC596-4-7 | Sps Technologies, Llc |
120978-4-7 | Sps Technologies, Llc |
C7521-4-7 | Lockheed Martin Corporation |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |
PBF7521-4-7 | Sps Technologies, Llc |
AIC596-4-7 | Sps Technologies, Llc |
120978-4-7 | Sps Technologies, Llc |
C7521-4-7 | Lockheed Martin Corporation |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |
PBF7521-4-7 | Sps Technologies, Llc |
AIC596-4-7 | Sps Technologies, Llc |
120978-4-7 | Sps Technologies, Llc |
C7521-4-7 | Lockheed Martin Corporation |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |
C7521-4-7 | Valley-todeco, Inc. |
VS3133-4-7 | Arconic Global Fasteners & Rings, |
C7521-4-7 | Alcoa Global Fasteners, Inc. |
VS3133-4-7 | Alcoa Global Fasteners, Inc. |