NSN 5306-01-054-4581
Coaxial Connector
Between 1.142 inches and 1.172 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30NE5-11 for national stock number 5306010544581.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-4581.
-
MPN or Model
BACB30NE5-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.142 inches and 1.172 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-028-7960 MPN 5-48530-5Aircraft Former
- 1560-00-214-8491 MPN 6-52679-2Pilots Window Latch Detent
- 4920-00-259-1776 MPN TE65B40862Switch Actuator Assembly
- 1560-00-604-9869 MPN 5-86504-4Wing Panel Assembly
- 1560-00-605-4650 MPN 66-4039-1Lock Switch Linkage
- 1560-00-608-3881 MPN 10-2455-26Aircraft Fuel Tank
- 1560-00-614-2399 MPN 29-8367Aircraft Access Cover
- 1560-00-640-9654 MPN 5-84471-10Cove Lip Door Stop
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-4581 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE5-11 | The Boeing Company |
BACB30NE5-11 | The Boeing Company |
BACB30NE5-11 | The Boeing Company |
BACB30NE5-11 | The Boeing Company |