NSN 5306-01-054-4594
Coaxial Connector
Between 2.892 inches and 2.922 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6603-41 for national stock number 5306010544594.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-4594.
-
MPN or Model
NAS6603-41
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 2.892 inches and 2.922 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 2.552 inches and 2.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5945-01-604-6595 MPN M6106/19-019Electromagnetic Relay
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-007-9880 MPN NAS1100E04-5PMachine Screw
- 5305-00-082-4729 MPN MS21125-0310Close Tolerance Screw
- 5305-00-090-4080 MPN NAS1580A3H5DClose Tolerance Screw
- 5305-00-208-6189 MPN MS24677-54Socket Head Cap Screw
- 5305-00-234-0663 MPN NAS338CFA22-5Machine Screw
- 5305-00-271-3474 MPN NAS212-7Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-4594 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603-41 | National Aerospace Standards |
BACB30NE3-41 | The Boeing Company |
NAS6603-41 | National Aerospace Standards |
BACB30NE3-41 | The Boeing Company |
NAS6603-41 | National Aerospace Standards |
BACB30NE3-41 | The Boeing Company |
NAS6603-41 | National Aerospace Standards |
BACB30NE3-41 | The Boeing Company |