NSN 5306-01-054-4599
Coaxial Connector
Between 3.080 inches and 3.110 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6603-44 for national stock number 5306010544599.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-4599.
-
MPN or Model
NAS6603-44
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 3.080 inches and 3.110 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 2.740 inches and 2.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-989-0884 MPN NAS1196-9Receptacle Dummy Connector
- 5940-01-394-0109 MPN NAS1063A3-TB504ACTerminal Board Marker Strip
- 5940-01-399-8069 MPN NAS1063B-1-14Terminal Board Marker Strip
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-045-3181 MPN MS24694S100Machine Screw
- 5305-00-057-0524 MPN NASM51958Machine Screw
- 5305-00-071-2226 MPN MS35202-60Machine Screw
- 5305-00-104-5076 MPN NAS1352-5LE56PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-4599 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603-44 | National Aerospace Standards |
BACB30NE3-44 | The Boeing Company |
NAS6603-44 | National Aerospace Standards |
BACB30NE3-44 | The Boeing Company |
NAS6603-44 | National Aerospace Standards |
BACB30NE3-44 | The Boeing Company |
NAS6603-44 | National Aerospace Standards |
BACB30NE3-44 | The Boeing Company |