NSN 5306-01-054-6229
Coaxial Connector
Between 0.688 inches and 0.708 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number PBF7521-3D6 for national stock number 5306010546229.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-6229.
-
MPN or Model
PBF7521-3D6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.688 inches and 0.708 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.036 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.456 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.584 inches first hole and 0.604 inches first hole -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-223-7671 MPN 3M925C6-9AClose Tolerance Screw
- 5305-01-266-3052 MPN 68A250583-2003Shoulder Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5306-00-003-9388 MPN MS21250-08052Shear Bolt
- 5306-01-044-6542 MPN VAL23607-3-18Shoulder Bolt
- 5306-01-052-4442 MPN VAL22034-18G134Shear Bolt
- 5306-01-054-1534 MPN BACB30LM3-7Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-6229 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-3D6 | Sps Technologies, Llc |
120978-3D6 | Sps Technologies, Llc |
AIC596-3D6 | Sps Technologies, Llc |
VS3133-3D6 | Alcoa Global Fasteners, Inc. |
C7521-3D6 | Valley-todeco, Inc. |
VS3133-3D6 | Arconic Global Fasteners & Rings, |
C7521-3D6 | Alcoa Global Fasteners, Inc. |
C7521-3D6 | Lockheed Martin Corporation |