NSN 5306-01-054-6230
Coaxial Connector
Between 1.319 inches and 1.339 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number PBF7521-6-14 for national stock number 5306010546230.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-6230.
-
MPN or Model
PBF7521-6-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 1.319 inches and 1.339 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.679 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-575-2579 MPN 3M943E5-5-6Headle Shoulder Pin
- 5305-00-510-5288 MPN LS15263V06-5Machine Screw
- 5305-01-101-6032 MPN 3M926-4L-12Close Tolerance Screw
- 5305-01-379-9749 MPN 3M927-3L7Close Tolerance Screw
- 5305-01-490-6858 MPN 3M1169C4-13AClose Tolerance Screw
- 5305-01-512-8294 MPN 3M1170C6-16AClose Tolerance Screw
- 5306-00-149-1835 MPN VEP220555-12-38Machine Bolt
- 5306-00-779-3757 MPN GB511C961Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-6230 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-6-14 | Sps Technologies, Llc |
120978-6-14 | Sps Technologies, Llc |
AIC596-6-14 | Sps Technologies, Llc |
VS3133-6-14 | Alcoa Global Fasteners, Inc. |
VCG0009-6-14 | Valley-todeco, Inc. |
VS3133-6-14 | Arconic Global Fasteners & Rings, |
C7521-6-14 | Alcoa Global Fasteners, Inc. |
C7521-6-14 | Lockheed Martin Corporation |