NSN 5306-01-054-8396
Close Tolerance Hex Head Bolt
Between 2.249 inches and 2.279 inches fastener length, undercut hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4-30 for national stock number 5306010548396.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-054-8396.
-
MPN or Model
BACB30NF4-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 2.249 inches and 2.279 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-065-6657 MPN 64-8328-448Nose Cowl Screen Assembly
- 5940-00-113-9834 MPN BACT12AC35Lug Terminal
- 1560-00-342-8261 MPN 5-73119-3Aircraft Tip
- 1560-00-510-3491 MPN 5-49481-19Stabilize Seal Assy
- 1560-00-574-9684 MPN 9-49684Aileron Shaft Assembly
- 1560-00-586-8502 MPN 5-86559-96Gap Wing Cover
- 5940-00-617-8440 MPN BACS13S312BGrounding Metallic Shielded Cable Ferrule
- 1560-00-633-0256 MPN 39-5541Drag Chute Adapter Retainer
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-054-8396 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4-30 | The Boeing Company |