NSN 5306-01-055-0159
Coaxial Connector
Between 0.672 inches and 0.692 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number PBF7521-4-5 for national stock number 5306010550159.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-055-0159.
-
MPN or Model
PBF7521-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.672 inches and 0.692 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.531 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8414 MPN 3M1170D3-7AFClose Tolerance Screw
- 5306-00-156-0655 MPN 3024T68P01Machine Bolt
- 5306-00-400-5743 MPN MS21250-07038Shear Bolt
- 5306-00-754-1757 MPN BACB30FD4-20Shear Bolt
- 5306-00-944-5961 MPN BACB30CW8-14Shear Bolt
- 5306-01-040-3365 MPN BACB30LJ6DU19Close Tolerance Bolt
- 5306-01-044-6540 MPN VAL23607-3-16Shoulder Bolt
- 5306-01-130-3268 MPN VCG0002-7-16Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-055-0159 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521-4-5 | Sps Technologies, Llc |
AIC596-4-5 | Sps Technologies, Llc |
120978-4-5 | Sps Technologies, Llc |
VCG0009-4-5 | Valley-todeco, Inc. |
H411-4-5 | Huck International, Inc. |
120978-4-5 | Sps Technologies, Llc |
VS3133-4-5 | Alcoa Global Fasteners, Inc. |
C7521-4-5 | Lockheed Martin Corporation |
C7521-4-5 | Valley-todeco, Inc. |
C7521-4-5 | Sps Technologies, Llc |
C7521-4-5 | Huck International, Inc. |
C7521-4-5 | Sps Technologies, Llc |
C7521-4-5 | Sps Technologies, Llc |
C7521-4-5 | Sps Technologies, Llc |
C7521-4-5 | Alcoa Global Fasteners, Inc. |