NSN 5306-01-055-6281
Coaxial Connector
2.491 inches fastener length, double hexagon extended washer head style, 0.504 inches head height, width between flats: between 0.556 inches and 0.565 inches .
Manufacturer part number NAS628H28 for national stock number 5306010556281.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-055-6281.
-
MPN or Model
NAS628H28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.741 inches -
Fastener Length
2.491 inches -
Head Style
Double hexagon extended washer -
Head Height
0.504 inches -
Width Between Flats
Between 0.556 inches and 0.565 inches -
Extended Washer Diameter
0.823 inches -
Extended Washer Thickness
0.123 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 8735 -
Material Specification
Aisi assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-428-6495 MPN NAS1063Terminal Board Marker Strip
- 5305-00-005-0417 MPN NAS603-50PMachine Screw
- 5305-00-052-8900 MPN MS24630-51Tapping Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-145-1011 MPN NAS1132-14Close Tolerance Screw
- 5305-00-150-3319 MPN NAS1135C6Close Tolerance Screw
- 5305-00-205-3844 MPN NAS1218-3-9Machine Screw
- 5305-00-242-9395 MPN NAS1634-3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-055-6281 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |
NAS628H28 | National Aerospace Standards |