NSN 5306-01-057-0293
Wheel Bolt
Between 2.640 inches and 2.687 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN12C24A for national stock number 5306010570293.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-057-0293.
-
MPN or Model
AN12C24A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.062 inches and 1.141 inches -
Fastener Length
Between 2.640 inches and 2.687 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.546 inches and 1.578 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-149-2753 MPN AN3102A22-13PElectrical Receptacle Connector
- 5935-00-235-0088 MPN AN3100A14S2PElectrical Receptacle Connector
- 5935-01-005-9390 MPN AN3108A18-10PElectrical Plug Connector
- 5305-00-151-1667 MPN AN510-3-6Machine Screw
- 5305-00-151-3060 MPN AN500-6-18Machine Screw
- 5305-00-543-5289 MPN AN565A6H2Setscrew
- 5305-00-754-0978 MPN AN515PB4-12Machine Screw
- 5305-00-823-5738 MPN AN515-8R56Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-057-0293 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN12C24A | Aeronautical Standards Group |