NSN 5306-01-057-3044
Coaxial Connector
Between 1.575 inches and 1.605 inches fastener length, spline extended washer head style, between 0.383 inches and 0.403 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number MS21297-07013 for national stock number 5306010573044.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-3044.
-
MPN or Model
MS21297-07013
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.753 inches and 0.803 inches -
Fastener Length
Between 1.575 inches and 1.605 inches -
Head Style
Spline extended washer -
Head Height
Between 0.383 inches and 0.403 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Head Minor Diameter
Between 0.485 inches and 0.500 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-431-9982 MPN VCL0009-3-5Close Tolerance Screw
- 5305-01-435-0447 MPN BACB30LU14-49YClose Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5306-01-050-3727 MPN BACB30NE5-53Shear Bolt
- 5306-01-077-9727 MPN VFK101G12-037Shear Bolt
- 5306-01-142-3548 MPN ST3M507-4-94Shoulder Bolt
- 5306-01-143-1744 MPN VAL23607-6-13Shoulder Bolt
- 5306-01-176-5025 MPN 9531M84P01Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-3044 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-07013 | Sps Technologies, Llc |
MS21297-07013 | Sps Technologies, Llc |
VFK101G7-013 | Valley-todeco, Inc. |
MS21297-07013 | Huck International, Inc. |
MS21297-07013 | National Aerospace Standards |
MS21297-07013 | Military Standards |
MS21297-07013 | Huck Intl Inc |