NSN 5306-01-057-3045
Coaxial Connector
Between 2.839 inches and 2.869 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297-05036 for national stock number 5306010573045.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-3045.
-
MPN or Model
MS21297-05036
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.579 inches and 0.629 inches -
Fastener Length
Between 2.839 inches and 2.869 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-478-2832 MPN 3M1170V3-7AClose Tolerance Screw
- 5305-01-629-0197 MPN BACS12GM3-24Machine Screw
- 5306-00-092-7339 MPN VEH160271-4M3Close Tolerance Bolt
- 5306-00-182-9391 MPN STSBG002A04U008Shear Bolt
- 5306-00-273-4006 MPN STSBG001A10D056Close Tolerance Bolt
- 5306-00-626-3843 MPN 493D2Externally Relieved Body Bolt
- 5306-01-005-5741 MPN J645P09AMachine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-3045 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-05036 | Military Standards |
MS21297-05036 | Huck International, Inc. |
MS21297-05036 | Sps Technologies, Llc |
MS21297-05036 | Sps Technologies, Llc |
MS21297-05036 | Huck Intl Inc |
VFK101G5-036 | Valley-todeco, Inc. |