NSN 5306-01-057-9311
Coaxial Connector
Between 1.589 inches and 1.619 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297-05016 for national stock number 5306010579311.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-9311.
-
MPN or Model
MS21297-05016
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.579 inches and 0.629 inches -
Fastener Length
Between 1.589 inches and 1.619 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-140-7286 MPN BACB30LH4-7Close Tolerance Screw
- 5305-01-452-1676 MPN LD111-0045-2417Close Tolerance Screw
- 5305-01-512-8306 MPN 3M1170D4-5AFClose Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5305-01-563-3863 MPN ST3M557-6-13Close Tolerance Screw
- 5305-01-564-5716 MPN BACB12CK08D7Machine Screw
- 5305-01-667-3011 MPN BACB30LH3-5YClose Tolerance Screw
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-9311 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-05016 | Sps Technologies, Llc |
MS21297-05016 | Sps Technologies, Llc |
VFK101G5-016 | Valley-todeco, Inc. |
MS21297-05016 | Huck International, Inc. |
NASM21297 | National Aerospace Standards |
MS21297-05016 | National Aerospace Standards |
MS21297-05016 | Military Standards |
MS21297-05016 | Huck Intl Inc |