NSN 5306-01-057-9314
Coaxial Connector
Between 2.401 inches and 2.431 inches fastener length, spline extended washer head style, between 0.440 inches and 0.460 inches head height, extended washer diameter: between 0.922 inches and 0.932 inches .
Manufacturer part number NASM21297-08025 for national stock number 5306010579314.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-057-9314.
-
MPN or Model
NASM21297-08025
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.829 inches and 0.879 inches -
Fastener Length
Between 2.401 inches and 2.431 inches -
Head Style
Spline extended washer -
Head Height
Between 0.440 inches and 0.460 inches -
Extended Washer Diameter
Between 0.922 inches and 0.932 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-465-2452 MPN 3M1170V5-12AClose Tolerance Screw
- 5305-01-512-8305 MPN TX1024C4-16-6AClose Tolerance Screw
- 5306-01-054-3423 MPN VCG0009L6-20Shear Bolt
- 5306-01-076-4880 MPN BACB30PU10-40Shoulder Bolt
- 5306-01-294-8705 MPN VAL23602-6DS040Close Tolerance Bolt
- 5306-01-336-6315 MPN VCG0030-5-15Close Tolerance Bolt
- 5306-01-338-6778 MPN 3M1043-6-19-10Shear Bolt
- 5306-01-339-0205 MPN BACB30US8-7Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-057-9314 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM21297-08025 | National Aerospace Standards |
NASM21297-08025 | Superior Graphite Co. |
NASM21297-08025 | Sps Technologies, Llc |
NASM21297-08025 | Huck International, Inc. |
VFK101G8-025 | Valley-todeco, Inc. |
MS21297-08025 | Sps Technologies, Llc |
MS21297-08025 | Sps Technologies, Llc |
MS21297-08025 | Huck International, Inc. |
MS21297-08025 | Military Standards |
MS21297-08025 | Huck Intl Inc |