NSN 5306-01-058-0730
Coaxial Connector
Between 1.645 inches and 1.675 inches fastener length, spline extended washer head style, between 0.383 inches and 0.403 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number MS21296-07013 for national stock number 5306010580730.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-0730.
-
MPN or Model
MS21296-07013
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.823 inches and 0.873 inches -
Fastener Length
Between 1.645 inches and 1.675 inches -
Head Style
Spline extended washer -
Head Height
Between 0.383 inches and 0.403 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-076-3155 MPN NAS1101-06-20Machine Screw
- 5305-01-089-3144 MPN HT4049-3-6Close Tolerance Screw
- 5305-01-284-8380 MPN C20645-5-26Close Tolerance Screw
- 5305-01-349-4191 MPN AIC1652-3-2Close Tolerance Screw
- 5305-01-381-2331 MPN AIC812-3-14Machine Screw
- 5305-01-386-2933 MPN AIC1700-5-9Close Tolerance Screw
- 5305-01-417-9050 MPN 3M1170D3-1Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-0730 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-07013 | Sps Technologies, Llc |
MS21296-07013 | Sps Technologies, Llc |
MS21296-07013 | National Aerospace Standards |
MS21296-07013 | Military Standards |
MS21296-07013 | Huck Intl Inc |