NSN 5306-01-058-0731
Coaxial Connector
Between 4.548 inches and 4.578 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21297-12054 for national stock number 5306010580731.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-0731.
-
MPN or Model
MS21297-12054
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.163 inches and 1.213 inches -
Fastener Length
Between 4.548 inches and 4.578 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 3.365 inches and 3.385 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2605 MPN LS15262V3-8Machine Screw
- 5306-00-054-5940 MPN 756172-103Eye Bolt
- 5306-01-054-3422 MPN C7521L6-19Shear Bolt
- 5306-01-060-6844 MPN C7521-6DN27Close Tolerance Bolt
- 5306-01-138-5336 MPN VDP0001-2Assembled Washer Bolt
- 5306-01-182-9109 MPN LD111-0020-0412Shear Bolt
- 5306-01-200-7747 MPN BACB30LJ4-10Close Tolerance Bolt
- 5306-01-212-8534 MPN C4356-7-0750Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-0731 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-12054 | Military Standards |
MS21297-12054 | Sps Technologies, Llc |
MS21297-12054 | Sps Technologies, Llc |
MS21297-12054 | Acufast Aircraft Products Inc. |
VFK101G12-054 | Valley-todeco, Inc. |
MS21297-12054 | Huck International, Inc. |
MS21297-12054 | Huck Intl Inc |