NSN 5306-01-058-3319
Coaxial Connector
Between 2.005 inches and 2.035 inches fastener length, spline extended washer head style, between 0.552 inches and 0.572 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number MS21297H10016 for national stock number 5306010583319.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-058-3319.
-
MPN or Model
MS21297H10016
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.995 inches and 1.045 inches -
Fastener Length
Between 2.005 inches and 2.035 inches -
Head Style
Spline extended washer -
Head Height
Between 0.552 inches and 0.572 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-354-9986 MPN NAS1063A12-1001Terminal Board Marker Strip
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5305-00-027-6244 MPN MS51021-69Setscrew
- 5305-00-058-4021 MPN MS24694S123Machine Screw
- 5305-00-069-2597 MPN MS35202-71Machine Screw
- 5305-00-070-3275 MPN NAS1153C12Close Tolerance Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-079-7985 MPN MS24694S203Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-058-3319 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H10016 | National Aerospace Standards |
MS21297H10016 | Military Standards |